Bobina de acero línea de corte de la producción

Especificaciones 1. Alta calidad
2.CE certificado
3. Mejor precio
4.Servicio completo


(0.3 ~ 3.0) × 1600mm línea de corte

1. Componentes:
Esta línea incluye la tabla de apoyo, carro de la bobina, uncoiler hidráulico, equipo de guiado de la hoja, sistema de nivelación, equipo de corte, equipo de revestimiento, equipo de corte, brazo de bobina, sistema de control eléctrico y equipo de recoiler



2. Parámetros técnicos

1	Material specification	Galvanized or carbon steel sheet at stress235Mpa (33KSI)
2	Coil thickness	0.3~3.0mm
3	Coil width	500-1600mm
4	Coil inner diameter	508~610mm
5	Coil out diameter	less then 2000mm
6	Max. coil weight	30T
7	Product coil inner diameter	508mm
8	Product coil out diameter	less then 1500mm
9	Product coil weight	10T
10	Production speed	0~120m/min
11	The slit width tolerance	± 0.05mm at thickness 0.5~1.0mm
		± 0.1mm at thickness 1.1~2.0 mm
		± 0.15mm at thickness 2.1~3.0mm
12	Slitting straighten tolerance	0.2mm/m
13	The slitting burr	length than 0.05mm
14	Min. slit width	30mm
15	The slit strip quantity	20 strips
16	The waste edge	3~15mm
17	The quantity of waste edge	2 strips
18	The max. weight of waste edge	less than 150kgs/roll
19	The main power	220KW
20	The weight of the line	about 68T
21	The dimension of the line	25000mm*8500mm

3. Componentes y funciones:

1	Supporte table	supported the material steel coil, in order that the coil car can feed the coil into the hydraulic un-coiler
2	Coil car	made of the coil car main body, V elevator, lifting oilcan, lifting post. And main motor, reducer and train transfer equipment, and railway with the function lifting and moving
3	Hydraulic uncoiler with both head	consist of the frame and railway and hydraulic cylinder, washer, hydraulic oilcan
4	Guiding equipment	consists of flexing supporter panel and oilcan
5	Rectify equipment	consists of one stand of rolls, and can adjust the rolls distance to adapt to different thickness
6	Shearing equipment	can cutting at the length when you need
7	Middle bridge 1#	guiding the sheet when the sheet twists
8	Fix the width equipment	limited rolls mainly adjust the width from 500mm to 1600mm, and fixed, and limited the sheet out the limited rolls when at high speeed
9	Slitting equipment	consist of the fixtable base and movablebase, the up and down khifeshaft, the equipment of lifting the up knife shate, and fix the shaft equipment
10	The knife shaft diameter	240mm
		the knife diameter:350mm
		main power" 75kw
11	The end press of the coil equipment	press the coil when slitting will be finished
12	The waste side re-coiler	re-coiler the waset side after slitting
13	Middle bridge 2#	reduce the speed difference at different equipment
14	Separate equipment	consist of separate rolls and its base, in order that every strip go ahead in their orbit
15	Re-coiler equipment	finish recoiling the strips slitted
16	Main power	90kw
17	Hydraulic supporter	support the re-coil shaft to get more capacity
18	The un-load coil car	it is near the un-coiler car
19	Hydraulic pneumatic system	consist of motor, oil pump, hydraulic value, oiltank, oilcan, hydraulic pipe, cylinder, and value, control the whole line hydraulic move
20	Hydraulic power	11kw
21	Oil pump	PV1-23(the speed is 33L/MIN)
22	System pressor	14Mpa, air original pressor 0.7Mpa(0.93m/min) and the air original is provided by the buyer
23	Electric control	consist of the standard electric box, main control panel, vice control panel and the switch box. The whole line is under control, the main control panel can control the slitting speed, and spot slitting and continuous slit.

Grupos de Producto : Máquina de corte y corte